Cone crusher or cone breaker is used to crush raw materials in the following industries like metallurgy, building materials, road building, chemical and silicate industries. It can break minerals and rocks with medium and above hardness. In comparison with other crushing machines, the symons cone crusher has advantages of higher crushing efficiency, lower energy consumption and regular grain size. Fote Machinery is China famous large cone crusher manufacturer, cone crusher supplier.
1. The crushing chamber is deep and there is no dead zone, thus improving the feeding capacity and output.
2. The crushing ratio is big and the product granularity is even.
3. The discharging mouth adopts gasket adjusting device which is reliable and convenient and has big adjusting range, which increase the flexibility of the equipment.
4. The lubrication system is safe and reliable and the unit replacement is convenient, thus reducing the maintenance work.
5. Fote cone crushers have simple structure, reliable working condition and low running cost.
6. The equipment can save more energy. Single machine can save energy by 15%~30%, and the whole system can save over twice energy.
7. This machine has low noise and little dust pollution.
8. Cone crushers is mainly used in such industrial departments as mine, metallurgy, chemistry, cement, construction, refractory and ceramics for the medium and fine crushing of rocks and ores with medium hardness.
9. The discharging mouth has wide adjusting range, which can satisfy the specific requirement of different customers.
10. It is the most suitable equipment for crushing various soft and hard ores whose compression strength is less than 320MPa and the biggest granularity of the materials to be crushed should not exceed the stipulation of technical parameter sheet.
Cone Crusher made by Xuanshi is widely used in industries like iron ore extraction, construction, road building, chemistry etc, to crush many kinds of mid-hard or hard rocks and ores such as iron ore, limestone, granite, basalt, quartz etc. The standard ones are used for intermediate crushing; the medium ones are used for fine crushing; and the short head ones are used for super thin crushing.
When cone crusher running, motor connecting belt pulley or coupling, transmission shaft and cone part makes rotary motion around a fixed point forced by eccentric bushingâ€™ pushing, thus crushing wall moves to or leaves far from the crushing wall which is on the adjusting sleeve, ores in the crushing chamber get impacted, squeezed and curved to be crushed. Motor makes crushing cone do cranking Motion, crushing cone closes to welding cone or leave from welding cone to accomplish crushing and blow down processes. There is spring between support sleeve and frame body to connect them, in case of metal block falling down to the machine body. If it happens, spring will be deformation and compressed, the foreign matter will be discharged to prevent machine from damage. When non-crushed material goes through the crushing chamber or machine is overload by any reason, cone crusher spring secure system will be activated, throat of the cone crusher will enlarge itself, foreign matter will be ejected from the machinery. Under the effect of spring, cone crusherâ€™s throat will automatic restore and crusher will restart to work.
|Model||Diameter of crushing cone
|Width of discharge opening
|Swing frequency of main shaft||Total weight